BT Internet Radio - Manual (Page 27)

27
Internet Radio – New Style – Edition 5 – 21.09.06 – 7690
1. Keep pressing Back to get to the radio’s top-level menu and then
turn the tuning dial to select
Media Player
and press Select .
2. Turn the tuning dial to display
UPNP Servers
and press Select .
The radio will scan for all available UPnP servers.
3. After a successful scan, select your UPnP server by turn the
tuning dial to highlight the one you want (if there is more
than one), then press
Select .
4. At this stage, your radio should be listed in ‘Windows Media
Connect’ and can be viewed from the ‘Devices’ window; your
radio will be displayed with its MAC address. To verify that the
MAC address listed is your radio, select
Configure
on your
radio’s menu and then turn the tuning dial until
Network
Config
is displayed and press Select . You can now control
the access for this device on your PC using Windows media
connect by looking in the ‘Devices’ section and clicking on
‘Deny’ or ‘Allow’.
5. Turn the tuning dial until
View Config
is displayed and
press Select .
6. Turn the tuning dial until
MAC Address
is displayed to view
your radio’s MAC address.
7. The radio will now list the media categories available from the
UPnP server, e.g. Music, Playlists etc. Turn the tuning dial to
select which category you wish to browse (for example
Music
) and press Select .
It may take a few seconds for the
radio to complete the scan. Before
the scan has completed, the radio will
display
[Empty]
. The radio will
continue to display
[Empty]
if no
UPnP servers are found.
Using the Media Player