BT Internet Radio - Manual (Page 33)

33
Internet Radio – New Style – Edition 5 – 21.09.06 – 7690
<Upgrade Firmware>
Choose this option to download new firmware to your radio.
<Language>
Choose this option to change the display language.
<Factory Reset>
Choose this option if you want to reset the radio to it’s
default settings.
<Register>
If you select this option, the display will show a key that can
be used to register the radio on the Reciva Customer portal:
http://www.reciva.com/
<Clock>
Choose this option to set the time, to set an alarm or to view
the current alarm setting.
<Sleep Timer>
Select the ‘Sleep timer’ option to enable the Internet radio to
switch itself off after a set period.
Select
Sleep Timer
, the display shows
Sleep Timeout.
Turn the tuning dial to set the time you want the radio to
switch off (in hours:minutes:seconds) and then press
Select .
See “Setting the clock” and/or
“Setting the alarm” on page 15 for
more information.
Using the Media Player
Press Back to cancel the radio
beginning a firmware upgrade.
A Firmware upgrade may take several
minutes. DO NOT switch off the radio
power until the upgrade is complete,
otherwise the radio may become
permanently damaged. Also, after a
firmware upgrade, the radio may be
required to reconnect to your network
– so have your encryption key handy.
If you perform a factory reset on your
radio you will lose all your presets and
your wireless network connection.
To switch the radio back on again,
press ON / OFF.