Rockwell Automation FactoryTalk Historian Classic for Batch User Guide - Manual (Page 12)

Chapter 2 Configuring FactoryTalk Historian for Batch
• Creating an RSBizWare Data Source
Explains required setup tasks for the FactoryTalk Batch system
administrator.
The following sections are provided as reference information for the
FactoryTalk Batch system administrator.
• Batch Archiver Event Filters for FactoryTalk Historian for
Batch
Lists FactoryTalk Batch and FactoryTalk Batch Material
Manager event filters that are set during installation.
• Batch Reporting Values for Optimum Performance
Lists data collection options that are set during FactoryTalk
Batch installation and provides alternative data collection
settings for optimum data access.
• Using FactoryTalk Historian for Batch in a Multiple Batch
Server Environment
Describes recommended system settings for using FactoryTalk
Historian for Batch with multiple batch servers.
The following instructions explain how to initialize the database
schema for FactoryTalk Historian for Batch. Complete these steps
after you have installed the RSBizWare software:
1. Configure the Information Services Manager. (See the
RSBizWare Configuration Assistant in the Service Console
for instructions.)
When the core RSBizWare database has been successfully
initialized, the traffic light icon displays a green light to
indicate that the server is running.
2. Stop the Information Services Manager. In the Service
Console, right-click the name of your Information Services
Manager, and from the pop-up menu, select Stop Server.
Initializing the RSBizWare
Database On Oracle 9i
12 Rockwell Automation Publication BHIST-UM011A-EN-E-June 2014