Rockwell Automation 1440-TB-E XM-944 Process/Temperature Terminal Base - Manual (Page 15)

XM-944 Process/Temperature Terminal Base 15
Publication GMSI10-IN024A-EN-P - May 2010
4. Press down on the terminal base unit to lock the terminal base on the
DIN rail. If the terminal base does not lock into place, use a
screwdriver or similar device to open the locking tab, press down on
the terminal base until flush with the DIN rail and release the locking
tab to lock the base in place.
5. Gently push the side connector into the side of the neighboring
terminal base to complete the backplane connection.