Wire the controlnet adapter – Rockwell Automation 1440-ACNR XM ControlNet Adapter User Manual
Page 12
Advertising
12 XM ControlNet Adapter
Publication
ICM-IN001B-EN-P - March 2013
Wire the ControlNet Adapter
WARNING
If you connect or disconnect wiring while the field-side power is on, an
electrical arc can occur. This could cause an explosion in hazardous location
installations. Be sure that power is removed or the area is nonhazardous
before proceeding.
WARNING
If you connect or disconnect the communication cable with power applied to
this module or any device on the network, an electrical arc can occur. This
could cause an explosion in hazardous location installations.
Be sure that power is removed or the area is nonhazardous before proceeding.
ATTENTION
Do not wire more than two conductors onto any single terminal.
Advertising