Rockwell Automation T3831 ICS Regent Communications Package for Winterpret - Manual (Page 17)

Communications Package for W INTERPRET (T3831)
P D - 6 0 4 1 M a r c h , 0 6
17
include it in GPL communications. Choose Exclude to remove
the asterisk to exclude the project from GPL communications.
When you are through choose OK to save your selections or
Cancel to abandon any changes you have made to the
participating projects list. After you choose OK or Cancel, the
Guarded Peer-Link Participating Projects dialog closes and
you return to the Guarded Peer-Link Configuration dialog.
Once you have selected the projects that will participate in
GPL communications you can define the GPL
communications variables.
Defining GPL Variables
After you have selected the participating projects you can
define the GPL variables. Choose Add, Edit or Delete to
define the GPL variables.
Add
Choose Add to add a new variable to the GPL configuration.
In the Add dialog shown in Figure 10, enter the name of the
GPL variable then select the project which provides the
variable.
For the example of GPL variables listed in Table 4, each of the
variables that are in the GPL Output Variables row would be
added to the GPL variables list and the providing project
would be the project that outputs the variable. For instance,
variable LT172_R1 would be entered and project REGENT1
would be selected as the providing project.
Figure 10. Adding a GPL Variable.