AJA Control Room - Manual (Page 12)

AJA Control Room v1.0 www.aja.com 12
Playback Tab
The Playback Tab view screen is the default tab screen. When this mode is selected, AJA
Control Room allows you to playback, view and trim the clips in your project.
Use playback functions for any clips that are loaded in the Bin. Double-click on a clip in
the bin to open it in the Playback viewer pane.
Figure 12. AJA Control Room Playback Tab.
Playback Dashboard In Playback mode you can use the dashboard to jog through the clip and set IN and OUT
points to trim the playback region. These edit points are also used for eventual Edit-to-
Tape output.
Standard tape deck controls are available for advance, stop, and rewind.
Various methods are available to change IN/OUT and Duration values. You can enter the
cursor and type values into the fields or use keystroke commands.
Keystroke Commands: These keystroke commands are available for manipulating the dashboard.
• Option + Play = Play reverse 1X
• Option + Frame Advance = Advance 10 frames
• Option + Frame Reverse = Reverse 10 frames
• I = set IN
• O = set OUT
• Option + I = clear set IN