AJA Control Room - Manual (Page 17)

AJA Control Room v1.0 www.aja.com 17
Next, in the options screen you can set the Capture type to:
• All Selected Items – captures content for all selected bin items, or
• Offline Items Only – captures content only for items in the bin with “footage offline”
Under Options, Use Logged Clip Settings is for future use. You may enable
Add Handles to add pre- and post-footage to your captures. After setting Batch Capture
Options, click Continue.
Figure 18. Batch Capture Options Screen
4. On the Batch Capture Screen, you may
• Select a single item and click Capture Clip to capture one item
• Click on Capture Tape to capture all listed items.
AJA Control Room will sequentially record multiple clips into the project directory and
assign the bin item links as the capture media is run.
Figure 19. Batch Capture Screen
You can right-click in the bin to delete a bin item, its media content, or both, from the bin
(refer to
“Bin Item Right-click Menu” on page 11 ). If you keep the bin item and delete the
media, the bin item icon’s red line returns.