Capture tab – AJA Control Room User Manual
Page 14
AJA Control Room v1.0
www.aja.com
14
Capture Tab
When you have your AJA edit device (Io, or KONA) installed and running, the Capture and
Edit-To-Tape tabs become active.
Figure 15. AJA Control Room Capture Tab
Using the Capture Tab, you can create a new clip from the input of your AJA device.
IMPORTANT:
Remember to verify that your AJA edit device frame buffer is set (via the AJA Control
Panel) for the expected video format and no unexpected conversions are taking place.
In AJA Control Room you can go to File>AJA Control Panel to open the control panel (see
If your input is from a Tape Deck and you have RS-422 connection, AJA Control Room
provides remote control of the deck and captures according to Timecode settings for
DURATION, VTR IN, and VTR OUT points (see
“Playback Dashboard” on page 12
).
Capture mode also supports Batch Capture which automates the process of capturing
multiple clips from one or more tapes. (see
).
NOTE:
When a Capture is in-progress, the viewer is outlined in red.