Section 5: assembly procedures, Mounting a tfm09 on an autocue “magic arm, Attach “magic arm” to the mounting bracket – Autocue TFM09 User Manual
Page 10: Assembly procedures 7 mounting a tfm09 on an, Attach “magic arm” to the mounting bracket. 7, Assembly procedures
TFM09 Assembly and Installation Guide
www.qtv.com
7
www.autocue.com
Issue
#
: 081
017
©
2003
-200
8
Au
to
cu
e Grou
p Ltd
S
ECTION
5:
Assembly Procedures
An
Autocue Talent Feedback Monitor (TFM) can be used with almost any
industry-standard camera and tripod combination. The TFM09 is usually used in
conjunction with
Autocue’s larger On-Camera Units.
Assembling and mounting your TFM09 involves:
•
attaching the mounting arm to the OCU mounting plate
•
attaching the monitor to the mounting arm
•
connecting required cables
•
ensuring all connections and fixings are secure.
The TFM09 is supplied with the mounting plate already attached to the back of the
monitor using standard VESA fittings.
N
OTE
:
A feedback monitor is usually ordered at the same time as
OCU with the mounting plate already attached to the OCU
mounting bracket.
5.1: Mounting a TFM09 on an
Autocue
“Magic Arm”
Talent feedback monitors should be attached to
Autocue’s standard OCU
mounting bracket using the recommended “Magic Arm” bracket.
5.1.1: Attach “Magic Arm” to the mounting bracket.
1. Insert one end of the “Magic Arm” bracket over one of the horizontal bars
of the OCU mounting bracket.
2. Securely fasten the locking screw.