Section 6: tfm09 operation, Connections, Operating your tfm09 – Autocue TFM09 User Manual
Page 12: Tfm09 operation, Tfm09 assembly and installation guide
TFM09 Assembly and Installation Guide
www.qtv.com
9
www.autocue.com
Issue
#
: 081
017
©
2003
-200
8
Au
to
cu
e Grou
p Ltd
S
ECTION
6:
TFM09 Operation
OSD (On Screen Display) menus are used to configure the TFM09 and prepare it
for displaying scripts.
N
OTE
:
While operating your TFM09, troubleshooting or maintenance
tasks may need to be performed on the prompter display unit.
For guidance, refer to section 7.
6.1: Connections
Once your TFM09, on-camera unit and camera combination are securely mounted
on a tripod attach the TFM09 cabling.
N
OTE
:
Ensure you have a power supply and video signal available.
1. Connect the video signal to the appropriate input socket.
2. Connect the IEC power cable to the power input socket.
6.2: Operating your TFM09
Turn on the TFM09 and if necessary, use the control buttons to adjust the
positioning and appearance of the image displayed.
All units are checked before being shipped using the default factory settings.
Depending on the ambient lighting conditions where you will be operating the
TFM09, you may need to adjust the brightness and contrast of the image.