B&D Mfg Smart - Manual (Page 2)

2
ALL THE PUMP YOU NEED AND MORE
Revised 7-5-12
Product Data
H
D
P
System Introduction –
For applications that require a little more than it’s
Multizone cousin can provide, the Smart Pump
Multizone utilizes the latest in “Variable Speed
Technology”. Designed for the high end residential or
commercial application, the Smart Pump Multizone
can be used with single phase power to keep things
simple. With no added controls to complicate your
system, the Smart Pump Multizone is very user
friendly, easy adjustable and customized for your
source side geothermal systems.
Efficient Operation –
When you look at pump motor efficiency, you will
notice that the smaller the motor, the less efficient
its operation. The Smart Pump Multizone utilizes
efficient motor technology with its one single motor.
In fact, less horse power will be used with a single
pump/motor combination, verses several small
circulators for your multizone heat pump system.
Installation Simplicity –
With only one pump and motor to install, contractor
installation time is reduced. All the work consists of:
setting the GT canister, mounting the pump to the
provided flange, mount the motor to the pump,
mount the variable speed drive unit on the adjacent
wall and the electrical power. Its that simple and
your system will be ready to run.
Competitive Installed Costs –
When you look at the cost of purchasing and
installing several pumps, switching to the Smart
Pump Multizone will save more than just energy.
Maintenance Simplicity –
The Smart Pump Multizone utilizes one of the
industries most popular in-line circulators. This
bullet proof pump is very reliable, however in the
event of a pump failure, parts and qualified
technicians are readily available.
Sealable Lid –
Provides for a closed, sealed system, while allowing for
ease of access to sample fluid and measure flow rate.
Inlet Connection –
Stainless Steel MPT connection is provided as
standard, with various transitions available upon
request. Size based on canister size (see chart—
Smart Pump Multizone Dimensions).
Check Valve –
Provided before the pump, assuring proper flow and
reliable pump operation.
Canister –
Provides a standing column of water on the suction
side of the pump to insure a flooded volute and
reliable pump operation. Size required is based on
max load design flow rate.
Optional Isolation Valve –
An isolation valve is available on the pump
discharge for ease of maintenance (not shown).
Variable Speed Pump Control –
The Smart Pump drive is robust and designed to
operate in some of the harshest conditions.
Insulation –
3/8” Armaflex insulation, factory provided, to
prevent condensation.
Dimensions –
Smart Pump Multizone Dimensions (in)
Size H D
P
(IPT)
Volume
(gal)
B 62 12 2 17.5
C 70 12 3 20.8
D 70 14 4 29.5