Bang & Olufsen BeoCenter 6-23 - User Guide - Manual (Page 14)

14
Use the radio
The television tunes in available radio
programs automatically when it is
installed for the first time.
If your television is equipped with the
optional DAB module, DAB programs
are tuned in automatically during the
first-time setup.
Once the programs are tuned in, you
can either activate the radio and step
through the tuned programs, key in
the number of the program you want,
or you can bring the entire list up on
the screen and find the desired
program there.
If you have created program Groups
you can also call up program lists for
your Groups.
Listen to tuned programs
To activate the built-in radio, choose RADIO
as your source. The last program you listened
to is switched on automatically.
Press to switch on the radio
Step up or down through the
available tuned programs, or …
… press the number of the
program you want to listen to
Press to see the name or number
of the current program
Press to swap between the
current and previous radio
programs
Press another source button,
such as TV to switch to television
channels
See list of all programs
Choose RADIO as your source and call up a
program list to get a complete overview of
the available radio programs.
Press to switch on the radio
Press and hold to bring up a
radio program list on the screen
Press or to step between
‘pages’ in the program list
To select a program, enter the
program number, or …
… press until the desired
program is highlighted
Press to switch on the chosen
program, or …
… press to leave the menu
RADIO
0 – 9
GO
0
TV
RADIO
GO
0 – 9
GO
EXIT
NOTE! For more information about how to tune in
additional programs, refer to the chapter ‘Re-tune
or add programs’ on page 20 in the Reference
book.
3507791_0604UK UG BeoCenter 6-23.indd 14 05/04/06 14:15:43