Bang & Olufsen BeoCenter 6-23 - User Guide - Manual (Page 9)

9
Speaker balance or combination
If you connect loudspeakers to your
television, you can adjust speaker balance
and change the speaker combination at any
time.
Press repeatedly to display
SPEAKER on Beo4
Press to adjust balance between
the left and right speakers
Press to select a speaker
combination
Press to remove SPEAKER from
the Beo4 display and return to
the source you were using
Speaker combinations
SPEAKER 1
Sound in the television
speakers only.
SPEAKER 2
Stereo sound in the two
external front speakers.
SPEAKER 3
Sound in the television
speakers and the two external
front speakers.
For information about how to preset a speaker
combination, refer to the chapter ‘Adjust picture
and sound settings’ on page 24 in the Reference
book.
Picture format
When you select a format yourself, the
automatic format selection is deactivated,
until you switch to a different channel or
change source.
Press repeatedly to display
FORMAT on Beo4
Press if you want to optimise the
picture, or …
… press the number of the
desired picture format
If you have chosen Format 1 …
Press or to select variations
of this format
If you have chosen Format 1*
or Format 2 …
Press or to move the
picture up and down
Press to leave the FORMAT
function
*Pictures in 4:3 format cannot be
moved up and down.
Picture formats to choose from
FORMAT 1 … For standard TV pictures. Three
variations are available: 4:3, 15:9 and Panoramic
view (for the largest picture).
FORMAT 2 … For letter-box pictures. When you
select FORMAT 2, the picture is automatically
adjusted vertically. This ensures that program
names or subtitles – if these appear in the
broadcasted picture – can be seen.
FORMAT 3 … For genuine 16:9 wide-screen
pictures. FORMAT 3 is usually selected
automatically. If this is not the case, you can
select it yourself.
LIST
FORMAT
GO
1 – 3
EXIT
LIST
SPEAKER
1 – 3
EXIT
3507791_0604UK UG BeoCenter 6-23.indd 9 05/04/06 14:15:40