Bang & Olufsen BeoVision 3-28 - User Guide - Manual (Page 24)

24
You can use the Beo4 remote control
to play and search through a
videotape no matter if the BeoCord
V 8000 is connected to your main
room television and operated via a
television in a link room, or
connected directly to the television
you are using.
However, recordings can only be
made as described if the video tape
recorder is connected directly to this
television.
From the recording menu, you can
check, edit or delete all the timed
recordings that are waiting to be
executed.
For further information about the
video tape recorder, refer to its own
Guide. Note, however, that some
features described in the video tape
recorder’s Guide are not available
when it is connected to the
television.
If you have a BeoCord V 8000…
Play and search through a tape
Once you have selected the video tape
recorder via Beo4, all operations are carried
out via Beo4. Playback of the videotape you
have loaded starts automatically.
Timed recording via teletext
Recordings are easily programmed via
teletext.
Insert a tape in the video tape recorder…
> Press V TAPE to activate the video tape recorder
– the tape then starts automatically…
While the videotape is playing…
> Press ss or tt to cue backwards or forwards
through the tape.
> Press ss or tt a second time to cue faster.
> Press ss or tt a third time to rewind or fast
forward through the tape, or…
> …press and hold ss or tt for 2 seconds to
rewind or fast forward through the tape.
> Press GO to start or resume playback.
> Press ▲ or ▼ to step forwards or backwards
through different tracks or recordings on a tape.
To pause or stop a tape…
> Press GO to pause the tape, press GO again to
resume playback.
> Press STOP to stop the tape completely.
> Press the • standby button to switch the
television and the video tape recorder to
standby.
V. TAPE PLAY 2:42
TV RECORD
NOW
TELETEXT
RECORD LIST
MENU
back select GO
PAGE MEMO POINT HALT
PAGE PROGRAM POINT HALT REC SETUP
P202 BBC S202 Ons 13 Oct 12:39:34
The menu bar on the teletext page.
The status line for a recording may appear above
the teletext page with both start and stop times
indicated, or on the actual program you want to
record.
The recording is now stored.
18:30- 21:00 13. OCT P1 BBC OK?
P202 BBC S202 Ons 13 Oct
PROGRAMMING STORED