Bang & Olufsen BeoVision 3-28 - User Guide - Manual (Page 38)

38
Adjust picture and sound settings
Picture and sound settings are preset
from the factory to neutral values
which suit most viewing and listening
situations. However, if you wish, you
can adjust these settings to your
liking.
Adjust picture brightness, colour or
contrast. Sound settings include
balance, bass, treble and loudness.
Store your picture and sound settings
temporarily – until your television is
switched off – or store them
permanently.
For further information about how to
change the picture format, refer to
the chapter ‘Adjust sound and picture
format’ on page 10.
Adjust the picture settings via the PICTURE
menu. Temporary settings are cancelled when
you switch off the television.
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu
and press ▼ to highlight OPTIONS.
> Press GO to bring up the OPTIONS menu and
press ▼ to highlight PICTURE.
> Press GO to bring up the PICTURE menu.
BRIGHTNESS is already highlighted.
> Press ss or tt to adjust BRIGHTNESS.
> Press ▲ or ▼ to move through menu items.
> Press ss or tt to adjust the values.
> Press EXIT to store your settings until you switch
off the television, or…
> …press GO to store your settings permanently.
For video sources using the NTSC signal, a fourth
option – Tint (colour shade or nuance) – is
available for adjustment.
PROGRAM GROUPS
TUNING
TIMER RECORDING
PLAY TIMER
OPTIONS
STAND POSITIONS
CONNECTIONS
SOUND
PICTURE
TV SETUP
back select GO
CONNECTIONS
SOUND
PICTURE
CLOCK
BEOLINK
MENU LANGUAGE
BRIGHTNESS
CONTRAST
COLOUR
OPTIONS
back select GO
BRIGHTNESS . . . . . . . .
CONTRAST . . . . . . . .
COLOUR . . . . . . . .
TINT . . . . . . . .
PICTURE
store GO
Change brightness, colour or
contrast