Bang & Olufsen BeoVision 3-28 - User Guide - Manual (Page 28)

28
First-time setup of your television
Select menu language
The first time you switch on your television,
you must select which language you want all
the menus to be displayed in.
Store all programs and settings
When you have selected the menu language,
a menu for program tuning automatically
appears on the screen.
MENU LANGUAGE
select accept GO
DANSK
DEUTSCH
ENGLISH
ESPAÑOL
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
TV
AUTO TUNE
start
CHECK AERIAL CONNECTION
When the menu for auto tuning appears, the
prompt CHECK AERIAL CONNECTION appears to
remind you to check that your TV aerial is properly
connected.
> Press tt to start auto tuning. The television tunes
in all available programs.
The menu language setup appears. If you wish to
change the menu language at a later date, you
can find the item under OPTIONS in the TV SETUP
menu.
> Press TV to switch on the television. The
language menu appears.
> Press ▲ or ▼ to move between the displayed
languages, if necessary.
> Press GO to accept the selected language.
The setup procedure described here is
activated only when the television is
connected to the mains and switched
on for the first time.
This procedure involves menu
language selection, automatic tuning
of TV programs, determination of the
centre position for the motorised
stand or base – if your television is
equipped with one – and registration
of any extra equipment you have
connected.