Bang & Olufsen BeoVision 3-32 - User Guide - Manual (Page 14)

14
Your Beo4 remote control gives you
access to a dual-screen function for
viewing two video sources at the
same time. For example, you can view
a videotape playback and a TV
programme at the same time,
provided that the selected sources
are available in your system.
While watching a programme or
recording, you can prompt your
television to divide the screen between
the current programme or recording
(picture A) and a new programme or
recording (picture B). You can also
swap the two pictures at any time.
The sound always follows picture A.
Volume adjustment with Beo4 always
affects the sound for picture A, while
other Beo4 operations, such as
selecting channels, affect picture B.
Choosing a new source cancels dual-
screen viewing.
While watching for example TV…
Press repeatedly to display
P-IN-P* on Beo4
Press for example V TAPE to
select a source to view on the
right side of the screen (B)
Press 0 to swap the left picture
and right picture
To leave the dual-screen
function…
Press to leave the function and
return to normal TV viewing
Pressing TEXT on Beo4 cancels
dual-screen viewing and
attempts to access teletext for
the source shown in picture A. If
there is no teletext service
available for this source, the
screen turns blank.
*In order to display P-IN-P or P-
V.AUX on Beo4, you must add
them to the Beo4 list of
functions. For further
information, refer to the chapter
‘Customise Beo4’ on the CD-rom.
To view a source registered in the ‘Connections’
menu as V.AUX, such as a set-top box, press LIST
repeatedly until P-V.AUX* is shown in the Beo4
display instead.
See two sources at the same time
LIST
P-IN-P
V TAPE
0
TV
A
A B
B