Bang & Olufsen BeoVision 3-32 - User Guide - Manual (Page 19)

19
Timed play via teletext
It is also possible to programme timed play
settings via teletext.
To enter timed play settings via teletext…
> Press
MENU while Start (start) is highlighted to
bring up teletext.
> Key in the number of the teletext page you
want.
> When the page is found, press MENU to make
a timed play programming. A cursor highlights
the first start time on the list.
> Press m or p to move the cursor to the
programme you wish to make a timed play for.
> Press GO to accept the start time.
> Press m or p to move to the stop time you
want, and press GO to accept it.
> A line appears on top of the teletext page listing
the start and stop time, followed by ‘OK?’.
> Press GO to store your timed play settings.
To activate the timed play function
You must activate the timed play function in
order for your Timers to be executed.
To activate the timed play function…
> Press
MENU to bring up the main menu.
> Press GO to bring up the Timer play menu.
> Press 2 to bring up the Activate Timer menu.
> Press m or p to reveal Yes. To switch off the
Timer play function, select No instead.
> When you have filled in the required
information, press GO to store your timed play
settings, or…
> …press EXIT to leave all menus without storing.
View, edit or delete a Timer
Bring up an on-screen list of the Timer
settings you have entered. From this list, you
can edit or delete your Timer settings.
To view, edit or delete your Timer settings…
> Press
MENU while Source (source) or Pr
(program) is highlighted to bring up a current
Timer index of previously entered Timer
settings.
> Press p or m to move through the list to a
setting you wish to edit or delete.
> To edit a setting, press GO and follow the
procedure described earlier.
> To be able to delete a setting, press MENU. The
date is replaced by Clear?
> Press GO to delete the setting, or EXIT to keep
it.