Bang & Olufsen BeoVision 3-32 - User Guide - Manual (Page 36)

36
Adjust picture and sound settings
Picture and sound settings are preset
at the factory to neutral values which
suit most viewing and listening
situations. However, if you wish, you
can adjust these settings to your
liking.
Adjust picture brilliance, colour or
contrast. Sound settings include
volume, bass, treble, loudness, and
balance. You can also adjust
subwoofer level, if BeoLab 2 is part
of your setup.
Store your picture and sound settings
temporarily – until your television is
switched off – or store them
permanently.
For further information on how to
change the picture format refer to
the chapter ‘Home Theatre’ on page
10.
Change brilliance, colour or contrast
Adjust the picture settings via the Picture
menu.
For video sources using the NTSC signal a fourth
option – TINT (colour shade or nuance) – will be
available for adjustment.
To change brilliance, colour or contrast…
> Press
MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press 3 to bring up the Picture menu.
> Press l or n to move between the items on the
menu.
> Press m or p to adjust the settings for each
item.
> Press EXIT to store your settings until you
switch off the television, or…
> …press GO to store your settings permanently.
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Connections
6 Menu
7 Clock
Brilliance Colour Contrast
32 32 44