Belkin SHARE 8820ED00394_F7D3402_V1 - Manual (Page 19)

19
GeTTInG TO KnOW YOUR ROUTeR
a) aDsl Connector
Connect your Router to a
phone jack using a telephone
cord . In some areas, a
microfilter might be required .
b) Wired (lan) Connectors
Connect computers and other
wired network devices to these
ports using Ethernet cables .
C) Usb Port
USB printers, disks, and other
USB devices plugged into this
port will be shared on your
network . Each USB port has a
light that indicates its status .
Off: No USB device is
connected or the attached
USB device is not in use .
blinking: Please wait to
unplug the device until
the light turns off .
On: The USB device is
connected and being
shared on your network .
D) Reset button
This button is used to restart
your Router in rare cases when it
functions incorrectly . Resetting
the Router will preserve your
settings . This button may also
be used to restore the factory
default settings . Please see
the Troubleshooting section
for more information .
e) Power Connector
Connect the included power
supply to this jack .
back Panel
(a)
(b)
(c)
(d)
(e)