Belkin SHARE 8820ED00394_F7D3402_V1 - Manual (Page 5)

5
GeTTInG sTaRTeD
1 . Connect your Router’s ADSL cable to your phone jack or phone-
jack adapter (microfilter) . If you are replacing an existing Router
or gateway, this may require unplugging the existing gateway .
note: If required by your Internet Service Provider (ISP),
plug the included phone-jack adapter (microfilter) into your
wall-mounted phone jack . Please check with your provider
before connecting your Router if you are unsure whether or
not you need to use the included phone-jack adapter .
2 . Plug the Router’s power supply into a wall outlet .
3 . Put the CD into your computer . If the CD doesn’t
open automatically, please browse to your CD drive
and double-click on the Belkin Setup CD icon .
4 . Click the Setup icon on the CD menu .
Setup