Bendix Commercial Vehicle Systems COMPACT 500 9/87 - Manual (Page 14)

14
SIDE COVER DISASSEMBLY
15. Remove O-ring(40) and seal(39). (See Figure 24)
NOTE: Do not attempt to remove the bearing. The side
cover MUST BE replaced if it is determined that the
bearing requires replacement. The side cover is supplied
with the bearing factory installed.
VALVE BODY AND SPINDLE DISASSEMBLY
16. With a drift punch unblock the safety point between
valve nut(33) and valve body(16). Loosen and remove
the valve nut with spanner wrench 297661 and remove
the spindle assembly(34), the ball race(28), the ball
cage(30), and the seventeen bearing balls. (See Figure
25)
FIGURE 25
33
28
34
30
29
17
16
TOOL 297678
FIGURE 24
39
41
40