Bendix Commercial Vehicle Systems WINGMAN ACB ACTIVE CRUISE W/BRAKING - Manual (Page 18)

18
The Bendix ® ACom ® Diagnostics for ABS User Guide is
available for download at the www.bendix.com web site
and should be used as a reference to all functions of the
ACom service tool.
In general, the protocol for Wingman ACB is described
as CAN or CAN 250. (See Figure 15 for an example of
an adapter compatible with Wingman ACB
). The Bendix ®
EC-60 ™ controller protocol will be described as J1708.
FIGURE 15 - BENDIX ® ACOM ® DIAGNOSTICS SOFTWARE -
HARDWARE INTERFACE SCREEN
4.2 READING DIAGNOSTIC
TROUBLE CODES (DTCs)
If the system generates a Diagnostic Trouble Code (DTC),
where a lamp or icon is illuminated on the instrument
cluster, then ACom Diagnostics software – version 6.3 or
later – is required. Select “ACB” from the starter screen,
then “Start with ECU”. Click “DTC” to show the diagnostic
trouble codes. See Appendix C for screen shots. See
Section 4.3 for a complete table showing DTCs and
troubleshooting information.
4.21 READING THE SYSTEM
SOFTWARE VERSION
If during troubleshooting, you are asked for the Wingman
ACB software version, the number is found on the “Wingman
ACB Status” tab. See Figure 16. See also Section 5.1 for
other system indicators.
.
FIGURE 16 - BENDIX ® ACOM ® DIAGNOSTICS SOFTWARE -
STARTER SCREEN SHOWING SOFTWARE VERSION