Bendix Commercial Vehicle Systems WINGMAN ACB ACTIVE CRUISE W/BRAKING - Manual (Page 26)

26
Con
fi guring Wingman ACB Following Distance Alerts (5.4)
Con
fi guration
No.
Option
Following Distance
Audible Alert (sec.)
Default
ACB
Following
Distance
(seconds)
Alert 1:
Slow
Alert 2:
Medium
Alert 3:
Fast
1
City — — 0.5
2.8
Highway (>37 mph) 1.5 1.0 0.5
2
City — — 0.5
3.5
Highway (>37 mph) 1.5 1.0 0.5
3
City — 1.5 1.0
2.8
Highway (>37 mph) 2.0 1.5 1.0
4
City — 1.5 1.0
3.5
Highway (>37 mph) 2.0 1.5 1.0
5
City — 1.5 1.0
3.5
Highway (>37 mph) 3.0 2.0 1.0
6
City 3.0 1.5 1.0
3.5
Highway (>37 mph) 3.0 2.0 1.0
7
City — — 0.2
2.8
Highway (>37 mph) — — 0.2
8
See Note
Below
City — — 0.5
1.7
Highway (>37 mph) 1.5 1.0 0.5
9
See Note
Below
City — — 0.5
2.3
Highway (>37 mph) 1.5 1.0 0.5
TABLE 8 - CONFIGURING FOLLOWING DISTANCE ALERTS (FDA) FOLLOWING DISTANCE.
Note: Con
fi gurations 8 and 9 are available on select applications only and may not be available on your system.
5.4 CONFIGURING BENDIX ® WINGMAN ® ACB FOLLOWING DISTANCE ALERTS
Multiple alert and distance setting strategies, known as Following Distance Alert (FDA) confi gurations, can be chosen
using the Bendix
® ACom ® Diagnostics tool. In ACom software (version 6.3 or higher), the service technician will fi nd a
selection box called “Confi guration Number” which gives the service technician the choices shown in Figure 18 and in
Table 8.
See Appendix B for an example of following distance alerts for systems where a Bendix ® Driver Interface Unit (DIU) is used.
Note 1:
For Con fi gurations 8 and 9 the stationary
object alert minimum activation speed is 30 mph. All
other confi gurations are 10 mph.