Bendix Commercial Vehicle Systems WINGMAN ADVANCED SD - Manual (Page 18)

18
The Bendix
®
ACom
® Diagnostics for ABS User Guide is
available for download at the www.bendix.com web site
and should be used as a reference to all functions of the
ACom service tool.
In general, the protocol for Wingman Advanced is described
as CAN or CAN 250. (See Figure 15 for an example of an
adapter compatible with Wingman Advanced
). The Bendix ®
EC-60 ™ controller protocol will be described as J1708.
FIGURE 15 - BENDIX ® ACOM ® DIAGNOSTICS SOFTWARE -
HARDWARE INTERFACE SCREEN
4.2 READING DIAGNOSTIC
TROUBLE CODES (DTCs)
If the system generates a Diagnostic Trouble Code (DTC),
where a lamp or icon is illuminated on the instrument
cluster, then ACom Diagnostics software – version 6.3
or later – is required. Select “Advanced” from the starter
screen, then “Start with ECU”. Click “DTC” to show the
diagnostic trouble codes. See Appendix C for screen
shots. See Section 4.3 for a complete table showing DTCs
and troubleshooting information.
4.21 READING THE SYSTEM
SOFTWARE VERSION
If during troubleshooting, you are asked for the Wingman
Advanced software version, the number is found on the
“Wingman Advanced Status” tab. See Figure 16. See
also Section 5.1 for other system indicators.
.
FIGURE 16 - BENDIX ® ACOM ® DIAGNOSTICS SOFTWARE -
STARTER SCREEN SHOWING SOFTWARE VERSION