Bendix Commercial Vehicle Systems WINGMAN ADVANCED SD - Manual (Page 47)

47 Appendix D
Appendix D
How to Read Key System Indicators and Reset Alignment Values
Read System Key Indicators (Con
fi guration)
1. Start Bendix ® ACom ® Diagnostics and connect to vehicle.
2. Select “Advanced” and Click “Start with ECU” to display the “Advanced Status” window.
3. Click “Confi g” to display the indicators
Take Note of:
Model #,
Software Version,
Software P/N,
Active DTCs
System Key Indicators
Attribute Description See Section:
Mounting Offset
This value should equal 0 if the radar sensor is mounted on the center line of the
vehicle. If the service technician believes the radar sensor should be mounted offset
from center, call 1-800-AIR-BRAKE.
6.10
Stationary Object
Warning Indicator This is a status indicator for the function of stationary object warning. Available for
use in Bendix ® Wingman ® Advanced ™ system versions since 2010.
1.07
Alignment Value
Trouble code will
be set if value is
-1.3º or less
Abnormal
operation:
-0.8º
Normal
operation:
normal
Abnormal
operation:
0.8º
Trouble code will
be set if value is
1.3º or more
6.07
Con
fi guration
Number
This indicates the distance setting and following distance alert that are confi gured for
the vehicle. Refer to Table 7 for setting information.
5.4
How To Reset The “Alignment Value”
4. From the confi guration window shown above, click “Modify.”
5. From the Change Confi guration window, select “Reset Alignment Value.”
6. Click “Write.”
7. Cycle the vehicle ignition power to complete the process.
Call the Bendix Tech Team at 1-800-AIR-BRAKE for troubleshooting assistance.