Bendix Commercial Vehicle Systems AUTO SLACK ADJUSTER SERVICE MANUAL - Manual (Page 6)

5
Steer Axle Installations
Figures 2, 3, 4 and 5 show typical brackets for self adjusting brake
adjuster installations on steer axles:
• Straight brake adjuster using a clamp-type bracket
(See Figure 2.)
• Offset brake adjuster using clamp-type bracket
(See Figure 3.)
• Offset brake adjuster using bolt-on type bracket
(See Figure 4.)
• Disc brake type installation (See Figure 5.)
Refer to pages 9, 10 and 11 for detailed installation procedures.
Figure 4 Offset (Bolt-On Type Bracket) Installation Figure 2 Straight (Clamp-Type Bracket) Installation
Figure 5 Disc Brake Type Installation Figure 3 Offset (Clamp-Type Bracket) Installation
AIR
CHAMBER
CLAMP-TYPE
BRACKET
AUTOMATIC SLACK
ADJUSTER
OFFSET
ARM
AIR
CHAMBER
AUTOMATIC SLACK
ADJUSTER
BOLT-ON
BRACKET
STRAIGHT
ARM
Typical Applications
CLAMP-TYPE
BRACKET
AIR
CHAMBER
STRAIGHT
ARM
AUTOMATIC SLACK
ADJUSTER
AIR
CHAMBER
OFFSET
ARM
AUTOMATIC SLACK
ADJUSTER
BOLT-ON
BRACKET
AX09
SELF ADJUSTING
BRAKE ADJUSTER
SELF ADJUSTING
BRAKE ADJUSTER
SELF ADJUSTING
BRAKE ADJUSTER
SELF ADJUSTING
BRAKE ADJUSTER
TORQUE TO
20-30 FT. LBS.
TORQUE TO
40-50 FT. LBS.
TORQUE TO
20-30 FT. LBS.
TORQUE TO
40-50 FT. LBS.
TORQUE TO
15-20 FT. LBS.
TORQUE TO
8-12 FT. LBS.