Bendix Commercial Vehicle Systems AUTO SLACK ADJUSTER SERVICE MANUAL - Manual (Page 7)

6
Drive Axle Installations
Figures 6, 7, 8 and 9 show typical brackets for self adjusting brake
adjuster installations on drive axle brakes:
• Straight brake adjuster using a clamp-type bracket
(See Figure 6.)
• Offset brake adjuster using bolt-on bracket
(See Figure 7.)
• Straight brake adjuster using bolt-on type bracket
(See Figure 8.)
• Disc brake application (See Figure 9.)
Refer to pages 9, 10 and 11 for detailed installation procedures.
Figure 6 Straight (Clamp-Type) Installation
Figure 7 Offset (Bolt-On Type Bracket) Installation
Figure 8 Straight (Bolt-On Type Bracket) Installation
Figure 9 Disc Brake Type Installation
AIR
CHAMBER
BOLT-ON
BRACKET
AUTOMATIC SLACK
ADJUSTER
STRAIGHT
ARM
Typical Applications
AIR
CHAMBER
CLAMP-TYPE
BRACKET
STRAIGHT
ARM
AUTOMATIC SLACK
ADJUSTER
AIR
CHAMBER
STRAIGHT
ARM
AIR
CHAMBER
OFFSET
ARM
AUTOMATIC SLACK
ADJUSTER
BOLT-ON
BRACKET
AX09
SELF ADJUSTING
BRAKE ADJUSTER
SELF ADJUSTING
BRAKE ADJUSTER
SELF ADJUSTING
BRAKE ADJUSTER TORQUE TO
20-30 FT. LBS.
TORQUE TO
40-50 FT. LBS.
TORQUE TO
15-20 FT. LBS.
TORQUE TO
8-12 FT. LBS.
TORQUE TO
8-12 FT. LBS.