Bendix Commercial Vehicle Systems AutoVue LDW by Bendix CVS Service Data Sheet User Manual

Page 4

Advertising
background image

4

What to Expect in Normal Operating Conditions

Situation

Green

Enable/Disable

Lamp

Amber

Status Lamp

Typical System Actions

At

Start-

Up

Self-test at power-up.

On and remains

illuminated.

On and

remains

illuminated.

Starting the vehicle supplies power to

the system. At start-up, the system

performs a self-test, then sounds

two chirps through [first the left, then

the right] the speakers. For vehicles

which have systems with vibrating seat

motors, the same sequence is followed

to indicate the system is ready. Once

the vehicle is running and the system is

ready, the green ENABLED lamp and

amber STATUS lamp illuminate.

Driver may test the enable/

disable switch: press ONCE. Lamp off.

Lamp off.

None.

Driver may test the enable/

disable switch: press AGAIN. Lamp illuminates.

Lamp

illuminated.

None.

On

the

Road

Active system Diagnostic

Trouble Code (DTC) is

present.

Lamp off.

Lamp

illuminated.

System disabled.

(Awaits system service)

Vehicle exceeds 37 mph

(60 Kmph), lane markings on

both sides are being tracked,

and there are no active

system DTCs.

Lamp remains

illuminated.

Lamp off.

None.

(System is now active).

(With turn signal ON) Driver

changes lanes.

Lamp remains

illuminated.

Lamp off.

None.

(Without turn signal) Driver

drifts out of lane/changes

lanes.

Lamp remains

illuminated.

Lamp off.

The speaker on the side of the

vehicle towards which it is moving/

drifting will emit a “rumble

strip” sound. (If installed, driver’s

seat vibration will also/instead be

activated.)

Vehicle slows to 37 mph

(60 Kmph), or below, and/or

one or both lane markings

are no longer able to be

tracked by the system.

Lamp remains

illuminated.

Lamp

illuminated.

None (system is NOT active).

Driver temporarily disables

the system by pressing the

disable switch (for example,

construction areas with

poorly marked lines may

cause multiple false alerts.)

Lamp off.

Lamp off.

The system will automatically

re-enable after 15 minutes.

FIGURE 6 - OPERATIONAL SCENARIOS WITH THE AUTOVUE LDW SYSTEM

2.0 SYSTEM OPERATION:

WHAT TO EXPECT WHEN USING THE

AUTOVUE

®

LDW SYSTEM BY BENDIX CVS

Advertising