Bendix Commercial Vehicle Systems ACom Diagnostics V.5.9 - Manual (Page 17)

17
Figure 54
Installation Test
NOTE: The installation test is for reference only; it
does not replace the need for an automated end of
line test process.
Figure 55
The installation test window will open up and wait for
user input. Either customize the test or start the test.
Figure 56
Customize
This allows the user to customize various aspects
of the installation test. Such as change the order in
which tests are performed. This is accomplished
by selecting the test and then selecting up or down.
Additionally, the user has the discretion to omit specifi c
tests according to the OEM’s vehicle quality testing
needs. This is accomplished by selecting (check mark)
or deselecting (no check mark) which test to perform.
ECU information and Scratch pad information are not
confi gurable, meaning they will always be part of the
test sequence.
Figure 57
Report Settings
The report settings portion of Customize allows the
user to save the report using the VIN as the fi le name
and to select the folder to save the report in or the user
can select to always have to enter the folder and fi le
name for the report. Additionally, the user can select
the feature of remembering the technician name for the
report so it will not have to be entered every time. If the
overwrite VIN & Free Text is checked this will take the
information from the installation test scratch pad and
write into the OEM and Fleet scratch pads.
Installation Test Report Format
The installation report format is selectable either HTML
or TEXT.
Wheel Speed Unit
The wheel speed unit allows for the wheel speed
information to be recorded in MPH or RPM (rotation
per minute).
Other Settings
The last option will disable the program from going to
the next step until a failed step has been corrected.
Report
The report can be printed at the end of the installation
test or saved for printing or record retention. Again the
report can be saved in either HTML or Text. The report
provides ECU information, and the results of the test.
Test Steps
A green check mark will be displayed when a test
passes. Similarly, a red “X” will be displayed should the
test fail. Some tests will require the user to respond if
the test data is good in order for test to complete.
ECU Information
This test will provide the user specifi c ABS ECU
information. If any data can not be read from the
ABS ECU, the Start/Next button will not enable. This
maintains the integrity of the overall test and ensures
components are available for testing.