Bendix Commercial Vehicle Systems ACom Diagnostics V.5.9 - Manual (Page 9)

9
Figure 13
When engine hours are available, the time stamp
will be displayed (displayed hhhh:mm, h=hours and
m=minutes) for a tractor or the odometer for a trailer.
Current engine hours are provided at the top of the
screen.
Figure 14
Diagnostic Trouble Code Information Events
The comments (not DTC information) are stored in the
same manner as diagnostic trouble code entries.
Figure 15
ESP Counter
ESP counter provides a listing of the ESP events that
have occurred. The listing identifi es the event, displays
a counter for number of times event has occurred, and
the engine hours of the last event.
Figure 16
Control Buttons
Repair Launches detailed repair information for
ONLY sensor and modulator DTCs.
Service
Data Launches the service data sheet
Read Manually command a read of the ECU.
This is dependent upon which tab is active.
Active diagnostic trouble codes will always
automatically refresh.
Clear Clears the diagnostic trouble codes,
depending on the active tab, this function will
send a clear command for active, inactive or
the event history, and information events.
Report This will launch a dialog and prompt the
user for more specifi c platform and user
information, and provide a written record
of the system diagnostic trouble code(s) in
question.
Help Launches Help dialog
Close Closes diagnostic trouble code screen
Confi guration Screen
The confi guration screen is used to display the ABS
ECU system confi gurations. Any unregistered or
incorrect confi guration will cause the ECU to generate
a diagnostic trouble code, and the confi guration will
not be changed. Therefore, any change to the system
must be fully understood by the user. If any questions
should arise, consult Bendix for clarifi cation.
Call 1-800-AIR-BRAKE or,
visit on the web at www.bendix.com.
Figure 17