Bendix Commercial Vehicle Systems ACom Diagnostics V.5.9 - Manual (Page 23)

23
and writing to a specifi ed area of memory in the ABS
ECU. This allows information to be stored for OEM
manufacturing data and fl eet service management.
Figure 84
Fleet scratch pad is shown next.
Figure 85
Control Buttons
Read Reads information from the scratch pad
Write Writes information to the scratch pad
Help Launches Help system
Close Closes screen
ADL Auxiliary Design Language
This screen provides the mechanism to add an ADL
program, which allows an AUX input or output of the
ABS ECU to be programmed for a specifi c function.
Currently the TABS-6 and EC-60
™ ECUs are the only
ABS ECU models to support ADL.
Figure 86
Program information section provides the user with
read only information regarding the program number
of the ADL function, the ECU type the ADL program is
intended for, and instruction set information.
Auxiliary I/O displays which I/O the ADL function will use
what type, either input or output, and the description of
the ADL feature.
The ABS fl ex program description explains the operation
of the ADL feature.
For more details on ADL please call 1-800-AIR-BRAKE
(1-800-247-2725).
Control Buttons
Read ECU Reads ECU current ADL program
information
Load Select ADL program to load (*.adl)
Program Download of ADL program
Erase Erases ADL program
Drawing Displays system drawing of ADL program
(*.pdf)
Help Launches Help system
Close Closes screen
DYNO Mode
This mode is available only for EC-60 ™ premium and
advanced ECUs. It allows the ECU to be tested on a
dynamometer.
Figure 87