Bird Technologies 5000-EX - Manual (Page 19)

Introduction
7
Speed Keys
- Scale
For element-based sensors, sets the forward full scale
power. This is listed on the forward element’s name-
plate. Reflected full scale power is automatically set to
10 dB below the forward full scale. This speed key is
disabled for non-element-based sensors.
- Fwd Units
Selects the units for the top display.
- Rfl Units
Selects the units for the bottom display. If the bottom
display is not in use, or does not have selectable units
this key will be disabled.
- Setup
For the DPS, enter a setup number to load a stored
setup. 0 returns to the default setups.
For the WPS enter the threshold power, in Watts, for
CCDF mode.
- Zero
For the TPS and the WPS, does a zero-power calibra-
tion. This speed key is disabled for all other sensors.
- Type
For the DPS, selects either average (APM/DPM) or
peak-reading (43) elements.
For the WPS, selects the measurement mode. In the
filter screen, selects the filter bandwidth.
- Filter
For the WPS, opens the filter screen for selecting the
filter bandwidth. This speed key is disabled for all
other sensors.