Blackline GPS Loner IS - Manual (Page 14)

12 // USER GUIDE
Loner IS Light Annunciation Patterns
Loner IS features audible, tactile and visual indicators for annunciating different types of
messages. Please see below for these patterns.
Type Beeper
Vibration
motor Indicator
light array
Low alarm Slow alarm
pattern Single repeating
vibrate Slow flash
High alarm Fast alarm pattern Double repeating
vibrate Fast flash
Low battery Single beep once
every 5 minutes No vibration Single flash
once every
5 minutes
No communication No beeper No vibration Slow double
flash
Chirp Single beep Single vibrate Single flash
Ensuring Protection with Loner IS
When safety monitoring is required, perform the following to ensure you are being pro-
tected with Loner IS.
1. Press the power button to turn on Loner IS.
The Power Button Indicator Light on Loner IS will blink while establishing a network
connection. The vibration motor vibrates and the beeper annunciates the power on
sequence. Loner IS will continue to flash the Power Button Indicator Light while it is
establishing a network connection.
2. When the Loner IS establishes a network connection the Power Button Indicator
Light remains on continuously.
3. Wear Loner IS on your belt at your hip at all times that you require remote safety
monitoring. Perform your work duties as you normally would. Loner IS automates
remote monitoring of your safety.
4. Power down Loner IS when remote monitoring of your safety is no longer required.
™ The Loner IS logo must face outward, away from your body for optimum GPS and fall
detection performance.