Blackline GPS Loner Mobile - Manual (Page 11)

9
Available Settings
Language
Choose your desired language.
GPS Publish Period (1-60 minutes)
Configuration of the GPS location publishing period .
Loner FDU Required
Enables or disables whether you require the optional Loner FDU.
Check-in Period (1-180 minutes)
Configuration of the user check-in period. Length of time between prompts for check-in
with the Loner Mobile application.
Check-in on FDU Motion
Enables or disables check-in with Loner FDU motion.
Check-in on GPS Motion
Enables or disables check-in with GPS speed above the GPS Motion Cutoff Speed.
GPS Motion Cutoff Speed (20-255 km/hr)
Speed above which Loner Mobile will check-in on GPS Motion
Check-in Holster
Enables or disables check-in with the Loner Mobile application by removing the BlackBerry
from its holster and replacing it.
Check-in Hot-Key
Hot-Key used to acknowledge a request from Loner Mobile for you to check-in. (May not
be visible on all phone models.
Emergency Hot-Key
Hot-Key for triggering an emergency notification.
Loner FDU Settings
The Loner FDU Settings contain configuration information that is sent to the Loner FDU
when it initially communicates with Loner Mobile.
No Motion Time-out (0 – 30 minutes)
Configure the time for the no motion detection on the Loner FDU.
Motion Sensitivity (0 – 100%)
Configure the sensitivity of the motion detection. Set to a low value if you require a lot of
motion to remain in motion and prevent a no motion alert.
Audible Alarm
Enable or disable the audible portion of the alert on the Loner FDU
Visual Alarm
Enable or disable the Indicator Light Array on the Loner FDU
Vibration Alarm
Enable or disable the Vibration motor on the Loner FDU