Blackline GPS Loner FDU - Manual (Page 12)

10 // USER GUIDE
Pairing the Loner FDU with a Smartphone
The first time the Loner FDU powers on, you must pair it with a smartphone running the
Loner Mobile application.
1. Press the Power Button to turn the Loner FDU on. The Loner FDU will turn on, the
green Indicator Light will blink and the beeper, Indicator Light Array and vibration
motor will annunciate the chirp pattern.
2. Ensure the Bluetooth is enabled on your smart phone.
3. In the Loner Mobile application, from the Menu select Loner FDU Status.
4. In the Loner FDU Status screen, from the Loner FDU menu select Enable
Loner FDU Function.
Charging Loner FDU
Plug the wall charger into an electrical outlet.
1. Insert the Micro USB Cable Plug into the corresponding Micro USB Charging Jack
on the charging clip ensuring the USB symbol on the cable faces the flat side
of the charging clip.
2. Slide the charging clip onto the Loner FDU using the guides to align the clip with
the Charging Port on the device.
3. Completely charge the Loner FDU for two hours.
4. Remove the charging clip from the Loner FDU.
™ Charging status can be determined by observing the Charging Light. See the section
Loner FDU Light Behaviour for more detailed information.