Blackline GPS Loner FDU - Manual (Page 17)

15
Initiating an Emergency Alert (Emergency Latch Use)
If you are in an emergency situation, perform the following:
1. Open the Emergency Latch.
2. Loner FDU will annunciate the alarm pattern to notify others nearby of the event.
3. Loner FDU will instantly send an Emergency Message to Loner Mobile.
4. Loner Mobile will acknowledge the message and instantly send the Emergency
Message to monitoring personnel.
5. Loner Mobile will annunciate the Emergency Alarm pattern based on the
LonerMobile_Emergency Ring Tone configuration.
6. The alarm pattern on the Loner FDU and Loner Mobile will continue until the
Emergency Alert has been canceled on the Loner FDU, or in the Loner Mobile appli-
cation, or the battery is depleted.
™ Another Emergency Alert will not occur until the Emergency Alert has been canceled.
Canceling an Emergency Alert (Emergency Latch Use):
1. Return the Emergency Latch to the closed position.
2. Press and hold the Acknowledge Button for 3 seconds.
3. Cancel the alert in Loner Mobile.
™ After three seconds, the alarm pattern will be silenced and the Loner FDU will return to
regular operation.
™ If the user cancels an Emergency Alert, this does not clear the alert within the Loner
Portal user account. Monitoring personnel are required to address the safety incident.
Initiating a Silent Emergency Alert
If you are in an emergency situation, where you prefer to not alert others in the area (a
silent emergency), perform the following:
1. Push and hold the Acknowledge Button for 10 seconds.
2. Loner FDU will vibrate for 5 seconds, pause and then vibrate for 5 more seconds.
3. A Silent Emergency Message will be sent to Loner Mobile.
4. Loner FDU will NOT annunciate the alarm pattern (it will remain silent).