Blackline GPS Loner FDU - Manual (Page 15)

13
Loner FDU Annunciation Patterns
The Loner FDU features audible, tactile and visual indicators for annunciating different
types of messages. Please see below for these patterns.
Type Beeper Vibration Motor Indicator Light Array
Low Alarm Slow alarm
Pattern Single repeating
vibrate
Slow flash
High Alarm Fast alarm
pattern Double repeating
vibrate
Fast flash
Low Battery Single beep
once every 5 sec Single vibrate
once every 5 sec Single flash once every
5 sec
Bluetooth Slow double
beep Single repeating
vibrate
Slow double flash
Chirp Single beep Single vibrate Single flash
Using the Loner FDU
When safety monitoring is required, perform the following steps to ensure you are
being protected.
1. Launch the Loner Mobile application on your smart phone.
2. Press the Power Button to turn on the Loner FDU.
3. The Power Button Indicator Light on the Loner FDU will blink while establishing a
Bluetooth connection with the smart phone.
4. Wait for the device to establish a Bluetooth connection. The Power Button Indicator
Light remains on continuously.
5. Wear the Loner FDU on your belt at your hip at all times that you require remote
safety monitoring.
6. Perform your work duties as you normally would. The Loner FDU automates remote
monitoring of your safety.
7. When remote monitoring of your safety is no longer required, power down the
Loner FDU and close the Loner Mobile application.
About Bluetooth
Bluetooth is a low power communication protocol that requires the Loner FDU and the
smart phone to be within close proximity of each other. To ensure constant communica-
tion between the Loner FDU and the smartphone, keep both devices with you.