Troubleshooting – Blomberg GSN 9470 XSP User Manual

Page 37

Advertising
background image

36 EN

Troubleshooting

Machine does not start.

• Power cable is unplugged. >>> Check if the power cable is plugged in.
• Fuse is blown. >>> Check the fuses in your house.
• Water is cut. >>> Make sure that the water inlet tap is open.
• Door of the machine is open. >>> Make sure that you have closed the door

of the machine.

• On / Off button is not pressed. >>> Make sure that you have turned on the

machine by pressing the On / Off button.

Dishes are not washed clean

• Dishes are not placed orderly in the machine. >>> Load the dishes as

described in the user manual.

• Selected programme is unsuitable. >>> Select a programme with a higher

temperature and cycle time.

• Impellers are stuck. >>> Prior to starting the programme, turn the lower and

upper impellers by hand to make sure that they rotate freely.

• Impeller holes are clogged. >>> Lower and upper impeller holes might

be clogged with food remnants such as lemon pips. Clean the impellers

regularly as illustrated in section "Cleaning and Care".

• Filters are clogged. >>> Check if the filter system is clean. Clean the filter

system regularly as illustrated in section "Cleaning and Care".

• Filters are installed incorrectly. >>> Check the filter system and make sure

that it is installed correctly.

• Baskets are overloaded. >>> Do not overload the baskets in excess of their

capacity.

• Detergent is stored under unsuitable conditions. >>> If you are using powder

detergent, do not store the detergent package in humid places. Keep it in a

closed container if possible. For ease-of-storing, we recommend you to use

tablet detergents.

• Detergent is not sufficient. >>> If you are using powder detergent, adjust

the amount of detergent according to the soiling degree of your dishes and/

or programme definitions. We recommend you to use tablet detergents for

optimum results.

• Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse

aid if necessary. Increase the rinse aid setting if there is enough amount of

rinse aid in the machine.

• Detergent dispenser lid is left open. >>> Make sure that the detergent

dispenser lid is closed tightly after adding detergent.

7

Advertising