Technical specifications – Blomberg GSN 9470 XSP User Manual

Page 5

Advertising
background image

4 EN

Technical specifications

This product complies with the following EU directives:

Development, production and sales stages of this product comply with the

safety rules included in all pertaining European Community regulations.

2006/95/EC, 89/336/EC, 93/68/EC, IEC 436/DIN 44990, EN 50242

Power input

220-240 V, 50 Hz

Total power consumption

1900-2200 W

Heater power consumption

1800 W

Total current

10 A

Drain pump power

consumption

30 W

Water pressure

0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0 Mpa)

C

Technical specifications may be changed without prior notice to improve the

quality of the product.

C

Figures in this manual are schematic and may not match the product exactly.

C

Values stated on the product labels or in the documentation accompanying

it are obtained in laboratory conditions in accordance with the relevant

standards. Depending on operational and environmental conditions of the

product, these values may vary.

Note for test institutions:

Data required for performance tests shall be provided upon request. Requests

can be e-mailed to the following address:

Do not forget to provide the code, stock and serial numbers of the product to be

tested in your request e-mail along with your contact information. Code, stock and

serial numbers of the product is located on the type label attached to the side of

the door.

[email protected]

Advertising