Blomberg GSN 9483 XB20 - Manual (Page 24)

23 EN
1065 eps
�
�
�
�
2. Repeat the same process to raise
the other side of the basket.
3. Make sure that both sides of
the basket height adjustment
mechanism are at the same level
(down or up).
To lower the basket:
1. Press the latch on the basket
adjustment mechanism (right or
left) to lower the basket (B).
2. Repeat the same process to lower
the other side of the basket.
3. Make sure that both sides of
the basket height adjustment
mechanism are at the same level
(down or up).
2. Repeat the same process to lower
the other side of the basket.
3. Make sure that both sides of
the basket height adjustment
mechanism are at the same level
(down or up).
Adjusting the height of loaded
upper basket
(depends on the model)
Basket adjustment mechanism on
the upper basket of the machine is
designed to allow you create wider
areas in the upper or lover section
of the machine based on your
requirements by adjusting the height
of the loaded basket in up or down
directions without removing it from the
machine.
To raise the basket:
1. Grab one of the upper basket wires
(right or left) and lift it up (A).