Preparing laundry for drying, Correct load capacity – Blomberg TKF 8451 WZ GC 50 User Manual

Page 12

Advertising
background image

12 EN

Items cleaned, washed or spotted

with gasoil/fuel oil, dry-laundry
solvents, industrial chemicals or other
combustible or explosive materials
should not be dried in the dryer.

Items soiled with cooking oils,

acetone, alcohol, fuel oil, kerosene,
stain removers, turpentine, paraffin
and paraffin removers must be
washed in hot water with plenty of
detergent before being dried in the
dryer.

Preparing laundry for drying

• Check all garments before loading

and make sure that there is no any
lighters, coins, metal pieces, needles,
and etc. in their pockets or on them.

• Laundry may be tangled after

washing. Separate the laundry items
before placing them into the dryer.

• Sort the laundry according to their

types and thicknesses. Dry the same
type of laundry together. For instance,
thin kitchen towel and table cloths get
dry earlier than the thick bath towels

.

C

Laundry must be spun at the highest

spin speed that the washing machine
allows on basis of the fabric type.

Correct load capacity

Follow the instructions in the “Programme
selection and consumption table”. Do not
load more than the capacity values stated
in the table.

C

It is not recommended to load the
dryer with laundry exceeding the
level indicated in the figure. Drying
performance will degrade when the
machine is overloaded. Furthermore,
dryer and the laundry can get
damaged.

Following weights are given as examples.

Home articles

Approximate

weights (g)

Cotton quit covers
(double)

1500

Cotton quit covers
(single)

1000

Bed sheets (double)

500

Bed sheets (single)

350

Large tablecloths

700

Small tablecloths

250

Tea napkins

100

Bath towels

700

Hand towels

350

Garments

Approximate

weights (g)

Blouses

150

Cotton shirts

300

Shirts

200

Cotton dresses

500

Dresses

350

Jeans

700

Handkerchiefs (10
pieces)

100

T-Shirts

125

Advertising