Blomberg TKF 8451 WZ GC 50 - Manual (Page 22)

22 EN
programme instead of Iron Dry
programme, press and hold the
Start / Pause / Cancel button for 3
seconds to cancel the programme.
2. Select Extra Dry programme by
turning the Programme Selection
knob.
3. Press Start / Pause / Cancel button
to start the programme.
C
You can also select a new
programme by turning the
Programme Selection knob while the
machine is operating. In this case,
current programme is aborted and
the new programme information
appears on the display.
Adding / removing laundry in Pause
mode
In order to add or take out laundry after
the drying programme has started:
1. Press Start / Pause / Cancel button
to switch the machine to Pause
mode. Drying process will stop.
2. While in Pause mode, open the
loading door, add or take out laundry
and close the loading door.
3. Press Start / Pause / Cancel button
to start the programme.
C
Any laundry added after the drying
process has started may cause the
clothes that are already dried in the
machine intermingle with wet clothes
and the result will be wet laundry after
the drying process is over.
C
You may repeat laundry adding
or removing process as many
times as you desire during drying.
However, this process will increase
the programme time and energy
consumption since the drying
process will be interrupted repeatedly.
Therefore, it is recommended to add
laundry before the drying programme
has started.
C
If you select a new programme by
turning the Programme Selection
knob while your machine is in Pause
mode, then the current program
is aborted and new programme
information is displayed.
Do not touch the inner surface of
the drum when adding or taking
out laundry while a programme is
running. Surfaces of the drum are
hot.
Canceling the programme
If you want to stop drying and cancel
the programme for any reason after the
machine has started to run, press and
hold the Start / Pause / Cancel button
for 3 seconds. Lint Filter Cleaning and
Water Tank warning symbols light up and
“End” label appears on the display as a
reminder at the end of this period.
A
As the inside of the machine will be
excessively hot when you cancel
the programme while the machine
is running, activate the ventilation
program to cool it down.
C
Machine will stop if you turn the
Programme Selection knob while
it is operating. In this case, current
programme is aborted and the new
programme information appears on