Blomberg WNF 7300 WE20 - Manual (Page 11)

11 EN
Auxiliary function selection
Select the desired auxiliary functions before starting the
programme. Furthermore, you may also select or cancel
auxiliary functions that are suitable to the running programme
without pressing the Start / Pause button when the machine
is operating. For this, the machine must be in a step before
the auxiliary function you are going to select or cancel.
If the auxiliary function cannot be selected or canceled, light
of the relevant auxiliary function will blink 3 times to warn the
user.
C Some functions cannot be selected together. If a second
auxiliary function conflicting with the first one is selected
before starting the machine, the function selected
first will be canceled and the second auxiliary function
selection will remain active. For example, if you want to
select Quick Wash after you have selected the Prewash,
Prewash will be canceled and Quick Wash will remain
active.
C An auxiliary function that is not compatible with the
programme cannot be selected. (See "Programme and
consumption table")
C Auxiliary Function buttons may vary according to the
model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not
using the Prewash will save energy, water, detergent and
time.
C Prewash without detergent is recommended for tulle
and curtains.
• Quick Wash
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
C When you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
• Rinse Plus
This function enables the machine to make another rinsing in
addition to the one already made after the main wash. Thus,
the risk for sensitive skins (babies, allergic skins, etc.) to be
effected by the minimal detergent remnants on the laundry
can be reduced.
• Anti-Creasing
This function creases the clothes lesser when they are being
washed. Drum movement is reduced and spinning speed is
limited to prevent creasing. In addition, washing is done with a
higher water level.
• Rinse Hold
If you are not going to unload your clothes immediately after
the programme completes, you may use rinse hold function
to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water
in the machine. Press Start / Pause button after this process
if you want to drain the water without spinning your laundry.
Programme will resume and complete after draining the
water.
If you want to spin the laundry held in water, adjust the Spin
Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun
and the programme is completed.
• Soaking
The Soaking auxiliary function ensures better removal of
stains ingrained into the clothes by holding them in the
detergent water prior to startup of the programme.
Delayed Start
With the Delayed Start function the startup of the programme
may be delayed up to 19 hours. Delayed start time can be
increased by increments of 1 hour.
C Do not use liquid detergents when you set Delayed
Start! There is the risk of staining of the clothes.
Open the loading door, place the laundry and put detergent,
etc. Select the washing programme, temperature, spin speed
and, if required, the auxiliary functions. Set the desired time by
pressing the Delayed Start button. Press Start / Pause button.
The delayed start time you have set is displayed. Delayed start
countdown starts. “_” symbol next to the delayed start time
moves up and down on the display.
C Additional laundry may be loaded during the delayed
start period.
At the end of the countdown, duration of the selected
programme will be displayed. “_” symbol will disappear and
the selected programme will start.
Changing the Delayed Start period
If you want to change the time during countdown:
Press Delayed Start button. Time will increase by 1 hour each
time you press the button. If you want to decrease the delayed
start time, press Delayed Start button repeatedly until the
desired delayed start time appears on the display.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start
the programme immediately:
Set the Delayed Start period to zero or turn the Programme
Selection knob to any programme. Thus, Delayed Start
function will be canceled. The End/Cancel light flashes
continuously. Then, select the programme you want to run
again. Press Start / Pause button to start the programme.
Starting the programme
Press Start / Pause button to start the programme.
Programme follow-up light showing the startup of the
programme will turn on.
C If no programme is started or no key is pressed within
1 minute during programme selection process, the
machine will switch to Pause mode and the illumination
level of the temperature, speed and loading door
indicator lights will decrease. Other indicator lights and
indicators will turn off. Once the Programme Selection
knob is rotated or any button is pressed, indicator lights
and indicators will turn on again.
Child Lock
Use Child Lock function to prevent children from tampering
with the machine. Thus you can avoid any changes in a
running programme.
C If the Programme Selection knob is turned when the
Child Lock is active, "Con" appears on the display.
The Child Lock does not allow any change in the
programmes and the selected temperature, speed and
auxiliary functions.
C Even if another programme is selected with the
Programme Selection knob while the Child Lock is