1 important safety instructions, 2 installation – Blomberg WNF 7300 WE20 User Manual

Page 2

Advertising
background image

2

EN

1 Important safety instructions

This section contains safety instructions that will help protect

from risk of personal injury or property damage. Failure to

follow these instructions shall void any warranty.

General safety

8 years and older children and people with reduced

physical, sensory, and mental abilities as well as

unskilled or inexperienced persons can use this

appliance provided that they are supervised and

instructed on safe use of the appliance as well as to the

related dangers. Children should not play or tamper with

the appliance. Cleaning and user maintenance should

never be performed by children unless supervised by a

responsible adult.

Never place the product on a carpet-covered floor;

otherwise, lack of airflow beneath the machine will

cause electrical parts to overheat. This will cause

problems with your product.

Do not operate the product if the power cable / plug is

damaged. Call the Authorized Service Agent.

Have a qualified electrician connect a 16-Ampere fuse

to the installation location of the product.

If the product has a failure, it should not be operated

unless it is repaired by the Authorized Service Agent.

There is the risk of electric shock!

This product is designed to resume operating in the

event of powering on after a power interruption. If you

wish to cancel the programme, see "Cancelling the

programme" section.

Connect the product to a grounded outlet protected

by a fuse complying with the values in the "Technical

specifications" table. Do not neglect to have the

grounding installation made by a qualified electrician.

Our company shall not be liable for any damages that

will arise when the product is used without grounding in

accordance with the local regulations.

The water supply and draining hoses must be securely

fastened and remain undamaged. Otherwise, there is

the risk of water leakage.

Never open the loading door or remove the filter while

there is still water in the drum. Otherwise, risk of

flooding and injury from hot water will occur.

Do not force open the locked loading door. The loading

door will be ready to open just a few minutes after the

washing cycle comes to an end. In case of forcing the

loading door to open, the door and the lock mechanism

may get damaged.

Unplug the product when not in use.

Never wash the product by spreading or pouring water

onto it! There is the risk of electric shock!

Never touch the plug with wet hands! Never unplug by

pulling on the cable, always pull out by grabbing the

plug.

Use detergents, softeners and supplements suitable for

automatic washing machines only.

Follow the instructions on the textile tags and on the

detergent package.

The product must be unplugged during installation,

maintenance, cleaning and repairing procedures.

Always have the installation and repairing procedures

carried out by the Authorized Service Agent.

Manufacturer shall not be held liable for damages that

may arise from procedures carried out by unauthorized

persons.

Intended use

This product has been designed for domestic use. It is

not suitable for commercial use and it must not be used

out of its intended use.

The product must only be used for washing and rinsing

of laundry that are marked accordingly.

The manufacturer waives any responsibility arisen from

incorrect usage or transportation.

Children's safety

Electrical products are dangerous for the children. Keep

children away from the product when it is in use. Do not

let them to tamper with the product. Use child lock to

prevent children from intervening with the product.

Do not forget to close the loading door when leaving the

room where the product is located.

Store all detergents and additives in a safe place away

from the reach of the children.

2 Installation

Refer to the nearest Authorised Service Agent for installation

of the product. To make the product ready for use, review

the information in the user manual and make sure that the

electricity, tap water supply and water drainage systems are

appropriate before calling the Authorized Service Agent. If they

are not, call a qualified technician and plumber to have any

necessary arrangements carried out.

C

Preparation of the location and electrical, tap water and

waste water installations at the place of installation is

under customer's responsibility.

B

Installation and electrical connections of the product

must be carried out by the Authorized Service Agent.

Manufacturer shall not be held liable for damages that

may arise from procedures carried out by unauthorized

persons.

A

Prior to installation, visually check if the product has any

defects on it. If so, do not have it installed. Damaged

products cause risks for your safety.

C

Make sure that the water inlet and discharge hoses

as well as the power cable are not folded, pinched or

crushed while pushing the product into its place after

installation or cleaning procedures.

Appropriate installation location

Place the machine on a rigid floor. Do not place it on a

long pile rug or similar surfaces.

Total weight of the washing machine and the dryer -with

full load- when they are placed on top of each other

reaches to approx. 180 kilograms. Place the product

on a solid and flat floor that has sufficient load carrying

capacity!

Do not place the product on the power cable.

Do not install the product at places where temperature

may fall below 0ºC.

Place the product at least 1 cm away from the edges of

other furniture.

Advertising
This manual is related to the following products: