Blomberg MEE 4150 X - Manual (Page 34)

EN 6
ATTENTION: The following steps are for
the Microwave Oven models with the
Built-in Trim Kit Frame Only.
1. After taking all the accessories
out of the microwave oven, turn
the microwave oven over on its
back and keep the base of the
microwave oven facing towards
you.
2. Remove the adjustable feet (Fig.
No. 2) from the plastic bag and
screw them into the holders (Fig.
No. 1), one by one.
3. Once all 4 feet are fitted, turn the
microwave oven back over onto
its feet to check if the adjustable
feet are level. If the microwave
oven is unstable, adjust the feet
by screwing them up or down
accordingly.