Blomberg MEE 4150 X - Manual (Page 41)

EN 13
a) Press “Conve” button to choose
convection cooking, press
“Conve” button to choose 200 °C
temperature.
b) Set cooking time for 20 minutes
c) Press
“Start”
10. Clock
The oven can be used as a clock.
Example: to input current time 16:30
a) Press “Clock”, the clock symbol will
flash in display. Rotate the “Time
setting” knob to set “16:00”.
b) Press “Clock” again, rotate the
“Time setting” knob to set “16:30”
c) Press “Clock” again, the clock
setting is finished, the time start to
go on working.
11. Timer
The timer function helps the microwave
oven begin automatic cooking at set
time, and automatically stop operation
after finishing cooking. (You should set
the clock before using timer function).
Example: the current time of microwave
oven is 16:30, to set cooking at 18:15
on 70% power for 10 minutes.
a) Press “Timer” and set time to18:15
(same procedure as setting clock).
b) Press “Micro” to set 70% power.
c) Input cooking time 10 minutes by
rotating the knob “Time Setting”.
d) Press “Start”.
If you don’t set power and cooking time
(omit B and C steps), and directly press
“Start” button, the microwave oven will
work only as a clock, there will be 10
beeps at 18:15, but no other function
will run.
12. Child-safety lock
To activate the child safety lock, press
“Auto Menu” and “Combi” button at the
same time for 2 seconds.
Press “Auto Menu” and “Combi” button,
at the same time for 2 seconds again, it
will unlock this function.
13. Pause/Cancel
a) In the course of operation, pressing
“Pause/Cancel” button will stop
operation.
b) If any program was set before
pressing start, pressing this button
will cancel all the set program.