Blomberg GEN 12400 X - Manual (Page 15)

15 | EN
Switch off the gas burners
Turn burner control knob to off position
(top).
Flame failure device (model dependant)
In case of any
flame failures for
any reasons in the
top burners, the
flame failure device
immediately cuts
of the gas flow.
1 . Flame failure
device
• Turn the knob clockwise direction by
pressing and wait for its ignition.
• Keep the knob at pressed position for
3-5 seconds after you see the flame
around the burner.
• Repeat the sequence of operations if
the flame does not continues. After
you release the knob, if the ignition
does not continue repeat the same
process by keeping the knob pressed
for 15 seconds.
DANGER
Risk of deflagration incase of
unburned gas!
Do not press the knob for longer
than 15 seconds if there was no
ignition.
Wait for one minute and then
repeat the ignition process.