Blomberg GEN 12400 X - Manual (Page 17)

17 | EN
7 TROUBLESHOOTING
DANGER
Risk of explosion or poisoning
by unprofessional repair.
Repairs on the appliance must be
carried out by an approved service
centre.
Normal operating conditions
• Smoke and smell may emit for a
couple of hours during the first
operation.
• When the metal parts are heated, they
may expand and cause noise.
Before you call the service, please
check the following points.
Gas
Malfunction/problem Possible cause Advice/remedy
No ignition spark is
produced. No electric supply to the
appliance. Check fuses in the fuse box.
Main gas tap is closed. Open gas tap. No gas is emitted.
Safety tube is bent. Install safety tube without
bends.
Burners are dirty. Clean burner parts.
Burners are not dry. Dry burner parts.
Burner cap is not securely
positioned. Position burner correctly.
Gas tap is closed. Open gas tap.
Burners do not burn
smoothly or not at all.
Gas container is empty (in
case of LPG connection). Replace gas container.
If the problem has not been solved:
1. Separate unit from the mains supply
(deactivate or unscrew fuse).
2. Call the technical service.
Important
Do not attempt to repair the
appliance yourself. There are
no customer service items
inside the appliance.